Weight dispensers Terainvest D1-1-2-2-4 , D1-1-1-2- Ex-5, etc.

Structurally, the weighing dispensers contain sensors for weighing and belt speed, as well as a mechanical system for feeding the product and an integrator. The principle of operation of the unit is that when the belt is moving, there is a constant change in its speed and load. These parameters are measured and the material consumption is calculated at the same time. The resulting value is compared with the specified operator, and in case of a discrepancy, a special controller corrects the speed of the tape. Belt weighing dispensers are actively used in agriculture, cement, chemical, mining, food and metallurgical industries. They are extremely simple in design, therefore they are reliable, durable and can be used in difficult operating conditions.

---

The weight dispenser of kvass wort is designed for dosing food and technical liquids in the process of semi-automatic packaging in containers.

Weight dispenser of kvass wort. Technical description.

---

Two-channel weighing dispenser D1-1-2-2-4 it is based on the weight principle of action, designed for dosing slightly acidic and slightly alkaline water-based technical liquids that do not react with copper-based alloys.

D1-1-2-2-4 . Technical description.

---

Four-channel epoxy resin weighing dispenser D1-1-1-4-2-6.7 designed for the preparation of mixtures based on epoxy resins using formulations that include up to 4 components.

D1-1-1-4-2-6.7. Technical description.

---

Weight dispenser of detergents D1-1-1-4-2-5 designed for dosing of technical liquids in the process of semi-automatic packaging in containers.

D1-1-1-4-2-5. Technical description.

---

Weight dispenser for 4 barrels D1-1-1-4-2-5 it is intended for dosing of technical liquids in the process of packing into containers supplied by a conveyor on a pallet of 4 units.

D1-1-1-4-2-5. Technical description.

---

Polyester resin dispenser two-channel D1-1-1-2- Ex-5 is designed for the preparation of two-component mixtures according to a given recipe.

D1-1-1-2- Ex-5. Technical description.

---

Weight dispenser with hopper D1-1-2-1-2 designed for dispensing viscous liquids (paint, etc.) in semi-automatic mode.

D1-1-2-1-2 . Technical description.

---

Weight dispenser of disinfectant D1-1-2-1-4 designed for dosing non-aggressive and non-abrasive liquids into containers with a volume of up to five liters by weight.

D1-1-2-1-4 . Technical description.

---

The weighing dispenser is automatic with the adjustment of the cycle time D1-1-2-1-2 designed for dosing of technical liquids by weighing, during the dosing process, the dispenser controls its own actuators – a device for cutting off the last drop, a shut-off solenoid valve.

D1-1-2-1-2 . Technical description.

---

Weighing table dispenser D1-1-2-1-2 it is used for dispensing technical liquids by weighing, during the dosing process the dispenser controls its own actuators–the device for cutting off the last drop by a shut-off solenoid valve and an external 3-phase pump.

D1-1-2-1-2 . Technical description.

---

Weight dispenser built into the table top D1-1-2-1-3-2 it is used for dispensing liquids (incl. flammable and flammable). Dosing takes place in semi-automatic mode when the operator presses the corresponding buttons on the control panel.

D1-1-2-1-3-2. Technical description.

---

The dispenser for packaging dry building mixes is used in the production of various building mixes.

Dispenser for packaging dry building mixes. Technical description.

---

The weight dispenser for explosive substances is used in the production of various building mixes.

Weight dispenser for explosive substances. Technical description.

---

Weighing dispenser for liquids of high viscosity and density D1-1-2-1-2 it is used for dosing liquids of high viscosity and density, chemically aggressive media, oily substances, various additives, mixtures, etc.

D1-1-2-1-2 . Technical description.

---

Price list